Troy-Bilt 13096 - Manual (Page 21)

Operation (continued)
Basic Lift Operation
Unlock lift before raising or lowering.
Lock lift down when cutting rough, uneven
terrain. To lock, push lever completely
down until button pops out.
TO UNLOCK LIFT WHEN IN RAISED
POSITION: Pull lift lever up slightly to
unload lift mechanism. Press button at
front of lift lever to release lock.
TO UNLOCK LIFT WHEN IN LOWERED
POSITION: Push lift lever down slightly to
unload lift mechanism. Press button at
front of lever to release lock.
TO RAISE OR LOWER LIFT: Release
button. Pull lift lever up to raise
attachment, push down to lower
attachment. To lock, push lever completely
down (or up) until button pops out.
Lift Lock-Down Cleaning
Whenever changing attachments or at the
end of each season, inspect lift lock-down
(K, Fig. 5-13) and clean out any debris.
Debris can build up in this area and may
prevent proper lift lock-down operation.
Electric Lift Operation (optional—
standard on model 13099 only)
Press the top of the electric lift switch (X,
Fig. 5-11) at 4 to raise the attachment.
Press the bottom of the electric lift switch
at 4 to lower the attachment. The frame
hung method is used unless the lift is all
the way down. Lowering the lift all the way
down allows the attachment to be ground
following.
21