Troy-Bilt 13096 - Manual (Page 31)

Maintenance (continued)
Maintenance Chart
INTERVAL* ITEM SERVICE
Each use Mower Blades Check
Air Intake Screen Check
Loose or Missing Hardware Tighten or Replace
Belts Check
Brake Check
Engine Oil Level Check
Firsts hours Engine Oil and Filter Replace
25 hours Engine Oil** Check
Air Filter Clean
Transmission Cooling Fins Clean
Axle & Spindle Bearings Check for wear and grease***
Brake & Clutch if necessary
Steering Sector Grease***
50 hours Engine Oil** Replace
Engine Oil Filter Replace
Transmission Oil Check (see “Maintenance” section for level)
100 hours Air Filter Element Replace
Fuel Filter Replace
Spark Plug(s) Replace
Each Season Linkages Lube & adjust
Cables Check/replace, adjust
Belts Check/replace, adjust
Wheel Bearings Grease***
Hood Wax with auto wax
Front Axle Spindles Grease***
Steering Sector Grease***
*intervai describes running time.
**Consult engine owners manual for more detailed engine service
information.
This table describes service guidelines only. It does not provide
complete service information. Complete service is available from
your authorized dealer.
***A hand-type grease gun is recommended when greasing the unit.
High-pressure type grease guns could cause damage to fittings/seals.
31