Flywheel screen (c, fig. 6-6), Fuel filter, Maintenance (continued) – Troy-Bilt 13096 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance (continued)
Fig. 6-4
Engine Oil Filter (Model 13099)
indicated in engine owners manual. Before
installing new filter, lightly oil filter gasket
with fresh, clean engine oil. Screw filter on
by hand until gasket contacts filter
adapter. Tighten 1/2 to 3/4 turn farther.
After oil is added, start and run engine.
Check for oii leaks. Stop engine, recheck
oil level and add oil if required.
materials such as oil, fuel, coolant,
brake fluid, filters, batteries, battery
acid or other waste materials onto the
ground, down a drain, or into a stream,
pond or lake. Contact local
environmental authorities for proper
waste material disposal information.
Use proper waste material storage
containers.
CONTAINERS TO STORE WASTE
MATERIALS. USING SUCH CONTAINERS
COULD RESULT IN ACCIDENTAL
POISONING.
Flywheel Screen (C, Fig. 6-6)
STOP ENGINE BEFORE CLEANING
FLYWHEEL! Check for debris and clean
regularly. A dirty air screen and engine can
cause engine to overheat.
Fuel Filter
The fuel filter (E, Fig. 6-7) is located in the
fuel line and filters fuel flowing from the
fuel tank. This filter is disposable. Replace
annually or when dirty. Refer to engine
owners manual for more complete fuel
24