Lubrication chart (refer to fig. 6-22), Maintenance (continued) – Troy-Bilt 13096 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Maintenance (continued)
Lubrication Chart (refer to Fig. 6-22)
ITEM
INTERVAL
LUBRICATION TYPE
AMOUNT REQUIRED
A-Engine Crankcase
First 5 hours
Change Oil & Filter
Refer to engine manual
supplied with unit
25-50 hours
Change Oil & Filter
(lubrication intervals vary
with operating conditions
and type of oil used)
B--Hydrostatic Transmission
25 hours
Check Oil Level (under seat)
See page 29
C--Front Axle/Spindles
25 hours
Multi-Purpose Grease
As Required
D-Brake Pedal/Linkages
25 hours
Engine Oil
As Required
E"Wheel Bearings
25 hours
Multi-purpose grease
As Required
F--Tie Rod Ends/Drag Links
25 hours
Engine oil
As Required
G-Steering Shaft
25 hours
Multi-Purpose Grease
As Required
H--Steering Sector
25 hours
Multi-Purpose Grease
As Required
Fig. 6-22
33