Generac Power Systems 00862-1 - Manual (Page 30)

OPTIONAL ACCESSORIES
A plug-in receptacle (Figure 33) is provided on the gen­
erator set, above the muffler enclosure. Use this recep­
tacle to connect an optional remote-mounted start/stop
panel to the generator. Installation of such a panel will
permit you to start and stop the generator engine from
any convenient location inside the vehicle.
Figure 33 — Remote Panel Plug-in Receptacle
MODEL 9043
WIRE#0
(GROUND)
REMOTE PANEL MODELS
■ MODEL 9042_______________________________
This remote panel (Figure 34) mounts a rocker type
start/stop switch and a “Generator Run” advisory
lamp. The lamp will turn on to indicate the engine is
running.
Figure 34 — Model 9042 Remote Panel
0
n.v.
This remote panel mounts a rocker type switch, a
“Generator Run” lamp and an hourmeter (Figure 35).
Use the hourmeter in conjunction with the periodic
maintenance schedule for your generator.
Figure 35 — Model 9043 Remote Panel
o o
GENERAC R.V. GENERATOR
OBM. Q
RLOU
STOP START
rri 1 II
TOTAL HOURS
o
REMOTE PANEL CABLES
Interconnection cables are available from Generac for
connecting the optional remote panels to the genera­
tor receptacle.
• To order a 10-foot long, 4-wire cable, specify Model 9045.
• To order a 30-foot long, 4-wire cable, specify Model 9046.
28 —