Instructions heat shield, Non-stick spit rod assembly – Ronco 6000 Series Standard Stainless Rotisserie Oven User Manual

Page 8

Advertising
background image

Showtime

®

Rotisserie

inStructionS

Heat Shield

note: the Heat Shield is not included in the 3000 Series models.
Never operate without

Heat Shield in place behind the Heating Element. Insert it from

the top. Discoloration over time is normal. From time to time you can remove it and use
steel wool to remove and clean any grease buildup. It is also dishwasher safe.
non-stick Drip tray and non-stick Grate cover must always be in place when using
the rotisserie.
Dishwasher Safe! you can put the Drip Tray, Basket and the Glass Door (if it will fit)
all in your dishwasher. Rinse off any grease first.
even easier clean up! you can line the bottom of your Drip Tray with a small sheet
of aluminum foil. Be sure it is flat against the bottom.

non-stick Spit rod Assembly

removable gear wheel fits on the Spit Rods after food (or
Basket) is loaded in place.

it is heavy and has sharp gear

teeth. When carrying the Spit rod Assembly always tilt
this end upward so it won’t fall off.
cAreFuL!
Use cAution. Tips are sharp. Please be very
careful with your hands when loading any food onto the Spit
Rods.
Spit rods are connected with screws to one gear wheel.
Place the removable gear wheel on after the food is loaded.
carving platform keeps the Spit Rod Assembly in place so you
can load food in upright position on a counter top or in a sink.

8

INSTRUCTIONS: Non-stick Spit Rod Assembly

VerY iMportAnt: Always
put the Heat Shield, non-
Stick Drip tray and Grate
cover in place
before operating.

Advertising