Akai MPC 2000xl User Manual
Page 102
Chapter 6: Creating and Editing Sounds
Page 91
•
LEVEL METER
While this screen is displayed, the meter will constantly display the level of the signal input.
The threshold setting is graphically represented by a within the meter’s range. In addition,
a shows the highest peak level received since the last time the
RESET PEAK
[F1] was
pressed.
If the recorded level is too high, the sampled sound will be distorted. On the other hand if it
is too low, white noise will be noticable. When you are recording set the level to the maxi-
mum within the range where the meter does not entirely hit the limit. Set the level using the
REC GAIN knob. It is not possible to change the level with the REC GAIN knob if you are
recording digital input and DIGITAL is selected in the
Input:
field.
By pressing
RESET PEAK
[F1], the peak displayed on the LEVEL METER will be reset.
By pressing
RECORD
[F6], the MPC2000XL will go to the recording standby mode and the fol-
lowing will be displayed.
START
CANCEL
Waiting for input signal...
Waiting for input signal...
LEVEL METER
LEVEL METER
LEFT :
LEFT :
RIGHT:
Input:ANALOG
Mode:STEREO
Monitor:L/R
Threshold:-34
Time: 10.0s
Time: 10.0s
Pre-rec:100ms
When a signal exceeding the threshold value is received, sampling will start.
To cancel sampling during the recording standby or recording modes, press
CANCEL
[F5].
To manually start sampling, before the value exceeds the threshold, press
START
[F6].
During recording, the following display will appear.
STOP
CANCEL
Recording...
LEVEL METER
LEVEL METER
LEFT :
LEFT :
RIGHT:
Input:ANALOG
Mode:STEREO
Monitor:L/R
Threshold:-34
Time: 10.0s
Time: 10.0s
Pre-rec:100ms
Sampling will end when the time set in
Time:
field is reached. The sampling will also end when
STOP
[F6] is pressed during sampling. Sampling will be interrupted when
CANCEL
[F5] is
pressed and will return to the original display.
The following window will be displayed when sampling is finished.
........................
......................................................................................................
....................................................................................................................................
PLAY
KEEP
RETRY
KEEP or RETRY
KEEP or RETRY
Name for new sound
Name for new sound
sound2
Assign to note:42/A03
Assign to note:42/A03
To listen to the sampled sound, press
PLAY
[F4].
When
RETRY
[F2] is pressed, the sampled sound will be discarded and the display will return to
the original display.