Hunter PRO-C (PCC) - Manual (Page 22)

22
Setting Station Run Times
1. Turn the dial to the RUN TIMES position.
2. The display will show the last program selected ( A, B, or C)
the station number selected, and the run time for that
station will be flashing. You can switch to another program by
pressing the
n button.
3. Use the j and k buttons to change the station run time
on the display. You may set station run times from 1 minute to
6 hours.
4. Press the i button to advance to the next station.
5. Repeat steps 2 and 3 for each station.
Setting Station Run Times