Pentax me super - Manual (Page 3)

23903 Page 2 of 32
3) f-volume (K101)
4) Hot shoe contact A (N4), Hot shoe contact C (N9)
5) EF switch contact piece (A44)
Before unsoldering, take out ASA volume (R100)
ASA volume retainer screw (A16-01)
CNL-D 1.7 x 2. 5
ASA volume (R100)
6) Connector base plate assy. (0-A21)
6. Self-timer charge lever assy. (0-A118)
Self-timer screw (A122) 231K-H50
Self-timer charge lever assy. (0-A118)
Self-timer collar (A123)
W30
7. Body covering
Body covering, right (A19)
Body covering, left (A20)
After peel off, re-install Self-timer charge lever assy. (0-A118)
8. Front board and Mirror housing complete assy.
At the charged condition.
CNL-D 1.7 x 3 x 2
P.C. board pattern retainer (I1)
W14
Front board retainer screw (A132-01) x 4
9. P.C. board pattern (T100)
T-CNL-E 1.7 x 4
Hot shoe contact piece A (N4)
Insulation collar (N8)
Insulation plate (N13)
T-CNL-E l.7 x 3
Hot shoe contact piece C (N9)
CNL-D 1.4 x 3
LED retainer collar (T212)