CBM America CBM-262 - Manual (Page 107)

7
Chapter 7 Print Control Codes
98
• If DLE EOT, GS I and GS r are used, it is necessary to distinguish between the
status from these commands and the ASB status. For the identification method,
see pages 49 ~ 51.
ᕃ First Byte (Printer Information)
Bit Status
Value
0 1
0 Not used 0 —
1 Not used 0 —
2 Drawer kick connector pin No. 3 status LOW HIGH
3 On-line/Off-line status On-line Off-line
4 Not used — 1
5 Cover status Closed Open
6
Paper feed status from paper feed Paper not Paper
switch feeding feeding
7 Not used 0 —
ᕄ Second Byte (Error Occurrence Information)
Bit Status
Value
0 1
0 Not defined — —
1 Not defined — —
2 Not defined — —
3 Auto cutter error No error Error
4 Not used 0 —
5 Irrecoverable error No error Error
6 Auto recovery error No error Error
7 Not used 0 —