CBM America CBM-262 - Manual (Page 32)

4
23
Operation Panel Keys
Entering Configuration Mode
Select YES (R) or NO (J) to the printed question and set it.
If YES: Press the RECEIPT key.
If NO: Press the JOURNAL key.
• Perform the operation with the front cover removed.
1. With roll paper set, switch the power on while pressing
both the RECEIPT key and the JOURNAL key.
This causes the printer to enter the printer configuration setting mode, and the printer
will print the following text in accordance with the selected menu for each item.
1. Prints the ROM version and the date.
2. If YES is selected, it resets the factory default
settings, then moves to the following line.
If NO is selected, the following line is printed.
3. If YES is selected, the currently set menues
are printed.
If NO is selected, the line in 5 is printed.
4. The input buffer, character settings (Interna-
tional character code) and serial protocol set-
tings are as set by the DIP switches.
5. If YES is selected, after the line in 6, printing
of the settings for each item is begun.
If NO is selected, the printing of 8 is done,
and setting of the printer ends.
6. Select NO until the menu of all the setting
items is set as desired. When the content is
correct, select YES. If YES is selected, the
setting contents are recorded in non-volatile
memory and the printer prints the next item.
When Error handshake setting item is ended,
the set contents (7) and 8 are printed, then
printer set up is ended.
2. Turn the power off, then turn it on again.
The set contents become enabled.
2
3
5
8
4
7
1
6
@ @ @ @ @ @ @ PRINTER SETTING MODE
YES:Push (R)eceipt Key
NO :Push (J)ournal Key
@ ROM(Even):AW32-0A0A
@ ROM(Odd) :AW33-0A0A
@ ROM Date :MAY-28-1996
Reset Current Settings
To Factory Settungs? YES (R) NO (J)
Print Current Settings? YES (R) NO (J)
@ @ @ @ Current Settings @ @ @ @
<HARDWARE SETTINGS>
@ :RECEIPT DENSITY 1/2/3/4
@ :JOURNAL DENSITY 1/2/3/4
@ :COVER OPEN SENSOR VALID/INVALID
@ :AUTO CUTTER VALID/INVAILD
@ :AUTO LOADING VALID/INVALID
@ :R PAPER NEAR END VALID/INVALID
@ :J PAPER NEAR END VALID/INVAILD
@ :CR CONTROL CR+KF/LF/IGNORE
@ :KANJI MODE VALID/INVALID
@ :RESET BY INIT VALID/INVALID
@ :RESET BY DSR VALID/INVALID
@ :ERROR HANDSHAKE BUSY/INVALID
@ :INPUT BUFFER 8KB/1LINE
<CHARACTER SETTINGS>
@ :CHARACTER TABLE PC473/PC850
@ :COUNTRY @ @ @ @ @ @ JAPAN/U.S.A
@ @ @ @ @ @ @ @ @ @ @ @ FRANCE/GERMANY
@ @ @ @ @ @ @ @ @ @ @ @ U.K./DENMARK
@ @ @ @ @ @ @ @ @ @ @ @ SWEDEN/ITALY
@ @ @ @ @ @ @ @ @ @ @ @ SPAIN/NORWAY
@ @ @ @ @ @ @ @ @ @ @ @ DENMARK2/SPAIN2
@ @ @ @ @ @ @ @ @ @ @ @ LATIN/KOREA
@ @ @ @ @ @ @ @ @ @ @ @ LEGAL
<SERIAL SETTINGS>
@ :DATA BIT 8BITS/7BITS
@ :PARITY NONE/ODD/EVEN
@ :PROTOCOL DTR:DSR
@ @ @ @ @ @ @ @ @ @ @ @ XON:XOFF
@ :BUADRATE @ @ @ @ @ 9600/4800
@ @ @ @ @ @ @ @ @ @ @ @ 2400/19200
Change Current Setting? YES(R) NO(J)
@ :RECEIPT DENSITY 1
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :JOURNAL DENSITY 1
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :COUVER OPEN SENSOR VALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :AUTO CUTTER VALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :AUTO LOADING VALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :R PAPER NEAR END INVALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :J PAPER NEAR END INVALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :CR CONTROL CR+LF
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :KANJI MODE INVALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :RESET BY INIT VALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :RESET BY DSR VALID
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ :ERROR HANDSHAKE BUSY
@ @ @ @ @ @ @ @ @ @ @ @ @ YES(R) NO(J)
@ @ @ @ Current Settings @ @ @ @
@ :RECEIPT DENSITY 1/2/3/4
@ :JOURNAL DENSITY 1/2/3/4
@ :COVER OPEN SENSOR VALID/INVALID
@ :AUTO CUTTER VALID/INVALID
@ :AUTO LOADING VALID/INVALID
@ :R PAPER NEAR END VALID/INVALID
@ :J PAPER NEAR END VALID/INVALID
@ :CR CONTROL CR+LF/LF/IGNORE
@ :KANJI MODE VALID/INVALID
@ :RESET BY INIT VALID/INVALID
@ :RESET BY DSR VALID/INVALID
@ :ERROR HANDSHAKE BUSY/INVALID
@
SETTING MODE END!!