CBM America CBM-262 - Manual (Page 127)

9
Chapter 9 Appendix
118
Item Content Remarks
Printing Method Line Thermal Printing Method
Printing Width
54mm, 432 dots Non-printing area:
(Total dots in head: 448 dots) 2 mm on each end.
Dot Density 8 dots/mm (Horizontal/Vertical)
Paper Feed Pitch 0.125mm
Printing Speed 62.5 mm/sec. (500 dot line/sec) at maximum speed
Number of Printing 36 Columns (Horizontal 12
×
Vertical 24 Font A)
Columns 48 Columns (Horizontal 9
×
Vertical 24 Font B)
Types of Characters Alphanumeric, International Characters
Emulations ESC/POS™ compatible
Bar Code Types
UPC-A/E, JAN(EAN)13 Columns/8 Columns,
ITF CODE39, CODABAR
Line Interval
4.23 mm (1/6 inch)
Can be set by commands. Min. 1/203 inch.
Paper
Thermal roll paper 58
× φ
83 mm
φ
83 mm (See paper specifications.)
Interfaces RS-232C/Centronics Factory Option
Input Buffer
72 Bytes/8K Bytes
(Set by the operation panel.)
Power Supply AC120V±10% 60Hz Factory Option
Voltage AC230V±10% 50/60Hz
Power
42W
ASCII Slide Pattern
Consumption Printing
Weight Approx. 2.3 kg Main unit only
External
128
Ч
359.5
Ч
162.5mm
Dimensions
Operating
5~40°C
Temperature
30~80%RH(There should be no condensation.)
see page 116
and Humidity
Storage
Temperature – 10~60°C 10~90%RH
and Humidity
Print head life:
Pulse resistance: 50 million pulses
(Page coverage: 12.5%)
Reliability
Wear Resistance 30 Km
(Normal temperature and humidity,
using the recommended paper)
Printer Mechanism: MCBF 5 million lines
Auto Cutter Life: 300,000 cuts
Basic Specifications