NewAir AH-320E User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit.
Doing so will void your warranty. The inside of the unit contains no user serviceable
parts. Qualified personnel should perform all servicing only.
22. Connect to properly grounded outlets only.
23.SAVE THESE INSTRUCTIONS.
©
©
©
©
WARNING: This heater is for use on 120 volts.
The cord has a plug as shown in A. An adapter as
shown in C is available for connecting three-
blade grounding-type plugs to two-slot
receptacles. The grounding lug extending from
the adapter must be connected to a permanent
ground such as a properly grounded outlet box.
The adapter should not be used if a three-slot
grounded receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE
OF THE GROUNDED PEUG.
PRODUCT INFORMATION
Reflective heating technology replicates the sun’s healthy rays, directly warming the object or
person in front of the heater. As the temperature of the heated surface rises, the warming effect is
felt throughout the air and surrounding areas. Reflective heaters are great for open or large rooms,
and actually save you energy by warming objects and not the entire room.
Reflective heating is both safe and healthy- it produces no odors, chemicals, or fumes, and
doesn’t stir up dust. As a safety feature, the heater’s exterior housing does not get as warm
during use to reduce the risk of bums from anyone or anything touching the heater. Remarkably
efficient, our heater uses less power to create the same amount of heat as traditional heaters.
Equipped with safety tip-over switch and overheat auto-off, the NewAir reflective heater is safe
and reliable.
SPECIFICATIONS
Voltage Rating
120 V(60Hz)
Power Consumption
800W on High, 400W on Eow
Unit Size
14.5 m. (W) X 13.5 m. (D) x 34 m. (H)
Unit Weight
6.5 lbs