Trouble shooting – American Dryer Corp. AD-385 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION VII
TROUBLE SHOOTING
IMPORTANT: YOU MUST DISCONNECT and LOCKOUT THE ELECTRIC
SUPPLY and THE GAS SUPPLY or THE STEAM SUPPLY
BEFORE ANY COVERS or GUARDS ARE REMOVED FROM
THE MACHINE TO ALLOW ACCESS FOR CLEANING,
ADJUSTING, INSTALLATION, OR TESTING OF ANY
EQUIPMENT PER OSHA (Occupational Safety and
Health Administration) STANDARDS.
The information provided will help isolate the most probable component(s) associated with the
difficulty described. The experienced technician realizes, however, that a loose connection or broken/
shorted wire may be at fault where electrical components are concerned .. not necessarily the suspect
component itself. Electrical parts should always be checked for failure before being returned to the
factory.
37