Wiring, Terminal definitions, Call tone adjustment – Aiphone LEF-3 User Manual

Page 4: Selector switch for intermixing with lap modeis

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

WIRING------------

LEF-3 LEF-5, 10, 10S

im

1

©

2

©

Y ©

O

' LEW-5, LEW-10, and LEW-1 OS Terminal boxes are not equipped with K1

~ K5, K1 ~ K10 terminals.

LEF-10S
Front case
back view

Red Yellow Yellow

Speaker

LEW-5

( 5 )

@ 1

0

s ©

© 3

8 ®

© 4

9 ©

I © 5

1 0 ®

F

| © c

W\

| I 0 V ^ L 0 | |

LEW-10

LEW-1 OS

' Shorting link on E and - terminal: Must remain attached in

a single-master system. Remove when 2 or more masters
are in a system.

Terminal definitions

1

~

10

:

E:
C:

R:

Y:

L:

+j

PI:

P2, P3:

Station number, establishes communication to other LEF masters (to “C”
terminal) or LE subs (to “1” terminai)
Common communication line
“CALL”, Call receive from another master (and All Call/Chime/Music

reception)

Activates occupied LED to indicate when any master is ON (line drops to
OV DC when any master is on.)
Occupied mode control during All Call (becomes -

f

9V DC during All Call)

Door strike activation (becomes -

f

12V DC when “key” button is pressed)

12V DC power supply connection

All Call control (becomes -

f

IOV DC when All Call button is pressed and

activates pretone)

All Call transmit audio path from initiating master to BG-10C

★ K1 ~ K5 (LEF-5), K1 ~ K10 (LEF10,10S): Selective control terminal, used for video control with

MY PanTilt series, or for selective door release (w/RY-PA) from the master to multiple doors. (“K#”

terminal becomes ground (-) when corresponding station number is pressed.)

■ Call tone adjustment

3-position adjustment switch, located under directory cover plate.

y y y y y y

-3-pos.

LEF-3

Selector switch for intermixing with LAP modeis

If intermixing LEF with LAF models (except LAF-B), change

setting from B to A position on all LEF models.
* If a call tone is desired when a sub station calls in and the

system is occupied, change the switch on the LEF
masters to the A position.
“A” pos.: Mutes call tone at master while system

is in occupied mode.

“B" pos.: Call tone is heard when master is in

occupied mode.

FRONT CASE
BACK VIEW

3-pos.

LEF-5,10,103

(when shipped)

A

(when intermixing

T

with LAF)

- 4 -

Advertising
This manual is related to the following products: