First use – AEG 860 D User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
First use
Operation My sliding switches are arranged on the RH side (when viewed
below from the front).
The individual numbers and symbols have the following
meanings (from left to right):
Ql
la
-)S[-
1
2
3
4
= Lighting On
= Lighting Off
= Lighting
= Blower On
= Blower Off
= Blower setting switch
= Blower setting 1
= Blower setting 2
= Blower setting 3
= Blower setting 4
To switch on the fume extractor hood, set my blower switch to
the “On” position g.
The blower of the fume extractor hood runs.
With the blower setting switch §, you can set the fume extrac
tor hood to the power you require (depending on the amount of
fume being generated by the hobs).
You can separately switch my workplace lighting (hobs) on or
off with the On or Off H switch.
42