To insert the 2 carbon filters, proceed as follows – AEG 860 D User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special
accessories
Exhaust air
hoses
For wall box/fume extractor hood connection, it is best to use
the non-flammable exhaust air hose under
E-No. 610899008
(125 mm dia.) from our range of special accessories.
Preparing
for
return
air
operation
The fume extractor hood is used as a return air hood when no
ventilation shaft or outer wall is available.
For operation as a return air hood, it is necessary to install 2
active carbon filters KL600 (E-No. 610899470) for kitchen
fume absorption.
Active carbon filters KL600 are supplied as
special accessories
(for your own account).
To insert the 2 carbon filters, proceed as follows:
1.
Remove metal fat filter grille
(Fig. ES/D)
(press outwards by
unlocking the locking bolts)
(Fig. EW).
2.
Remove both knurled screws on the motor shaft (by turning
to the left), place one active carbon filter (round) on each
motor and screw the knurled screws into the motor shafts.
3.
Re-insert (re-engage) metal fat filter grille.
The fume extractor hood is now ready for return air operation.
34