Denso BHT-6000 - Manual (Page 51)

36
With this screen displayed, the BHT-6000 waits for
a file to be downloaded.
In the center of the 2nd line appears the selected
downloading type--(A:), (B:), or (HT<->HT) indicat-
ing the downloading to the RAM, to the flash ROM,
or copying between the BHTs, respectively. The
screen at left shows that "1: DRIVE A" has been
selected.
Upon start of optional Ir-Transfer Utility C, Trans-
fer Utility or equivalent program (upon receipt of
an ENQ code from the host computer), the BHT-
6000 displays the screen shown at left.
(Refer to the "Ir-Transfer Utility C Guide" or "Trans-
fer Utility Guide.")
While the downloading operation is in progress,
the screen shown at left is displayed indicating the
file name and the number of received records/the
total number of records.
To abort the downloading operation, press the
C key. The screen will switch back to the
DOWNLOAD menu.
Upon completion of downloading, the number of
received records becomes equal to the total
number of records and the beeper beeps once.
Press the C key to return to the DOWNLOAD
menu.
If the host computer downloads another new file
(if the BHT-6000 receives an ENQ code) when this
screen is displayed, the BHT-6000 starts receiving
it.
(Refer to the "Ir-Transfer Utility C Guide" or "Trans-
fer Utility Guide.")
If you have selected "3: HT<->HT COPY" on the
DOWNLOAD menu, a sequence of the above
screens will be repeated by the number of files to
be downloaded.
DOWNLOAD FILE
(A:)
** Waiting **
Download screens
DOWNLOAD FILE
(A:)
** Loading **
⇓
DOWNLOAD FILE
(A:)
SAMPLE00.PD3
** Loading **
XXXXX/YYYYY
⇓
DOWNLOAD FILE
(A:)
SAMPLE00.PD3
** Completed **
YYYYY/YYYYY
⇓