Denso BHT-6000 - Manual (Page 88)

73
Chapter 2. Getting Started the BHT-6000 and System Mode
Pressing the 1 key while holding down the
SF key on the SYSTEM MENU calls up the screen
shown at left.
1 DRIVE A-->DRIVE B : Copies a file stored in
the RAM, into the flash
ROM.
2 DRIVE B-->DRIVE A : Copies a file stored in
the flash ROM, into the
RAM.
Select a desired item by using the numerical keys
or F5 and F6 keys, then press the ENT key.
Reversed is the current setting.
Press the C key to return to the SYSTEM MENU.
File copy menu
[ 8 ] Copying Files
You can copy a program file or data file from the RAM to the flash ROM, or vice versa.
COPY
1:DRIVE A --> B
2:DRIVE B --> A
File selection screen
In the center of the 2nd line appears the selected
item--(A->B) or (B->A). This example shows that
the "1: DRIVE A-->DRIVE B" has been selected.
Program files and/or data files stored in the user
area of the RAM are displayed as shown at left.
Use the F5 and F6 keys to move the cursor to a
file to be copied, then press the ENT key.
If no file is resident in the selected drive, the mes-
sage shown at left appears.
Press the C key to return to the file copy menu.
Copy confirmation screen
COPY FILE
(A->B)
****************
*NO FILE EXISTS*
****************
Selecting a file to be copied and then pressing the
ENT key calls up the confirmation screen shown
at left.
1 Yes : Copies the selected file.
2 No : Cancels copying and returns to the pre-
vious file selection screen.
Select a desired item by using the numerical keys,
then press the ENT key.
COPY FILE
(A->B)
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
COPY FILE
(A->B)
SAMPLE01.PD3
Copy?
1:Yes 2:No