Dodge 2008 Nitro - Manual (Page 226)

Operating Instructions — Satellite Radio
Refer to your “Navigation User’s Manual” for detailed
operating instructions.
Clock Setting Procedure
The GPS receiver used in this system is synchronized to
the time data being transmitted by the GPS satellite. The
satellites’ clock is Greenwich Mean Time (GMT). This is
the worldwide standard for time. This makes the sys-
tem’s clock very accurate once the appropriate time zone
and daylight savings information is set.
To Manually Set the Clock
1. Turn the ignition switch to the ON or ACC position.
2. If the radio is off, turn it on by pressing the ON/OFF
Volume radio knob.
3. Press the Time soft key on the lower left side of the
face of the radio.
4. Press the HOUR or MIN soft keys on the face of the
radio.
5. The time setting will change each time you press the
HOUR or MIN soft key.
6. Press the SAVE soft key on the face of the radio.
Changing the Time Zone
1. Press the Time soft key on the lower left side of the
face of the radio.
2. Press the Set Time Zone soft key on the face of the
radio.
3. Select the appropriate time zone for your location, and
press the SAVE soft key to store your selection.
NOTE: When you are traveling and enter a new time
zone, the clock must be reset manually for the new zone.
226 INSTRUMENT PANEL AND CONTROLS