After starting, Engine block heater - if equipped, Engine block heater — if equipped – Dodge 2008 Nitro User Manual

Page 248

Advertising
background image

released. If this occurs, continue cranking with the accel-
erator pedal pushed all the way to the floor. Release the
accelerator pedal and the key once the engine is running
smoothly.

If the engine shows no sign of starting after two 15
second periods of cranking with the accelerator pedal
held to the floor, the “Normal Starting” or “Extreme Cold
Weather” procedures should be repeated.

After Starting

The idle speed will automatically decrease as the engine
warms up.

CAUTION!

Long periods of engine idling, especially at high
engine speeds can cause excessive exhaust tempera-
tures which can damage your vehicle. Do not leave
your vehicle unattended with the engine running.

WARNING!

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build up may
cause serious injury or death.

ENGINE BLOCK HEATER — IF EQUIPPED

The engine block heater warms engine coolant and
permits quicker starts in cold weather. Connect the cord
to a standard 110-115 volt AC electrical outlet with a
grounded three-wire extension cord.

• The engine block heater cord is found under the hood

clipped to the heater line on the left side of the engine.

248

STARTING AND OPERATING

Advertising
This manual is related to the following products: