Rear tail, stop, turn signal, and back-up lights, Rear tail, stop, turn signal, and back-up, Lights – Dodge 2008 Nitro User Manual
Page 392
Advertising
![background image](/manuals/72791/392/background.png)
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
Rear Tail, Stop, Turn Signal, and Back-Up Lights
1. Open the lift gate.
2. Remove the two push pins.
3. Pull lamp straight back and disconnect electrical con-
nection.
392
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: