Desa CDCFNRA - Manual (Page 21)

www.desatech.com 116658-01A 21
3. Install left and right brick liners using brackets
and screws from hardware kit as shown in Fig-
ure 34. Screw the bracket into top of firebox
and against brick liners. Adjust bracket before
tightening screw.
4. Remove log packaging material and discard.
Gently place log over burner (see Figure 35).
(Do not allow log to contact flame as this will
create sooting.)
5. Insert each rod through ten rings located at
top of screen (see Figure 36).
6. Insert first rod into hole in left side of firebox.
Fasten rod to rear hole near center of firebox us-
ing black Phillips head screw (see Figure 36).
7. Insert other rod into hole on right side of fire-
box and fasten rod to front hole near center of
firebox using remaining sheet metal screw.
INSTALLATION
Continued
Figure 33 - Installing Rear Brick Liner
Figure 34 - Installing Side Brick Liners
Figure 35 - Installing Log
Left Brick
Liner
Brick Liner
Bracket and
Screw
Rear Brick
Liner
Log Set
Figure 36 - Installing Screen
Screen
Screen
Rod
Rings
Screen
Assembly
Front Center
Hole for
Right Screen
Assembly
Back Center
Hole for Left
Screen Assembly