3DLABS WILDCAT REALIZM 100 - Manual (Page 40)

A PPENDIX B
3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 40
Wildcat Realizm 100
Two DVI-I analog/digital video output ports –
single-link DVI capable supporting the following
configurations:
• One or two analog display devices
• One or two single-link digital display devices
• One single-link display device and one analog
display device
Stereo Sync Support
• VESA-standard frame sequential stereo
• 3-pin, mini-DIN connector provides connection
to LCD shutter glasses or other stereo shutter
devices
Interrupts PCI-assigned, interrupt A
Wildcat Realizm 800
x16 PCI Express High-End
Wildcat Realizm 500 x16 PCI Express
Wildcat Realizm 200 AGP 3.0 support, 4x and 8x modes of operation,
(AGP 8x recommended)
Bus Connector
Wildcat Realizm 100 AGP 3.0 support, 4x and 8x modes of operation,
(AGP 8x recommended)
Mechanical Specifications
Wildcat Realizm 800 • 2-slot I/O bracket
• Plastic card guide
• 70 mm x 70 mm x 20 mm dual ball bearing fan
• Heat sinks for memory, the VSU chip, the two
VPUs
• Shroud
Wildcat Realizm 500 • 1-slot I/O bracket
• Plastic extender bracket (can be removed for a
shorter configuration)
• 110 mm x 86 mm x 13 mm fansink assembly,
copper
Mechanical
Components
Wildcat Realizm 200
Wildcat Realizm 100 • 2-slot I/O bracket
• Plastic extender bracket (can be removed for a
shorter configuration)
• 60 mm x 60 mm x 10 mm dual ball bearing fan
• Heat sinks for memory
• Shroud
Wildcat Realizm 800 150 Watts (Total)
PCI Express 2.5 Amps at 3.3 Volts
PCI Express 5.0 Amps at 12 Volts
Auxiliary 6.25 Amps at 12 Volts
Power
Requirements
Wildcat Realizm 500 53 Watts (Total)
PCI Express 1.5 Amps at 3.3 Volts
PCI Express 4.0 Amps at 12 Volts