3DLABS WILDCAT REALIZM 100 - Manual (Page 41)

A PPENDIX B
3Dlabs Wildcat Realizm Graphics Accelerator User's Guide 41
Wildcat Realizm 200 85 Watts (Total)
AGP 2.76 Amps at 3.3 Volts
AGP 0.7 Amps at 5 Volts
AGP 0.12 Amps at 12 Volts
Auxiliary 1.8 Amps at 5 Volts
Auxiliary 3.5 Amps at 12 Volts
Wildcat Realizm 100 75 Watts (Total)
AGP 2.92 Amps at 3.3 Volt
AGP 0.53 Amps at 5 Volt
AGP 0.1 Amps at 12 Volts
Auxiliary 1.4 Amps at 5 Volts
Auxiliary 2.8 Amps at 12 Volts
Thermal
Specifications For storage conditions:
• Temperature: –40°C to 65°C
• Humidity: 10 to 95% non-condensing humidity
Thermal Sensor The graphics card includes a thermal sensor circuit to protect the card from
an over-temperature situation, such as might occur if the fan fails. If the
sensor reaches a certain temperature, the card will shut down the on-board
power supplies, thus eliminating all power consumption. Once the sensor
shuts down the on-board power supplies, the user must power off the system
and correct the cooling problem. Then the system can be powered on and
the card will restart operation. The sensor circuit will not give the user any
indication that an over temperature situation is occurring.