3DLABS Oxygen GVX210 - Manual (Page 14)

Installation
3Dlabs Oxygen GVX210 User's Guide 4
3. Locate the AGP or AGP Pro slot you are going to use and remove its slot cover.
4. Attach the anti-static strap to your wrist, and attach the other end to a bare, conductive (as opposed
to painted or sticker-covered) area of your system’s chassis.
5. Remove the card from its anti-static packaging. Write down the serial number for registration and
future use.
6. Align the connector on the Oxygen GVX210 card over the AGP or AGP Pro expansion slot and seat
it firmly.
Important! See your system documentation for instructions on securing the card to the chassis.
Loose cards and connections can cause grounding and operating problems.
Installing the
Oxygen GVX210