3DLABS Oxygen 402 - Manual (Page 17)

Installation and User’s Guide
11
11. The Program Folder is where the Oxygen 3D Family Setup will add
the program icons required for your Oxygen card. You may create
a new folder such as the default provided,
OXYGEN3D, or you can
choose an existing folder from the scrolling listbox by clicking on
the folder to highlight your choice. Once you have identified the
Program Folder, click the “Next” button.
12. Setup is now installing the required Oxygen software files onto
your Windows NT system.
NOTE: 3D Studio MAX R1 users must also install the Oxygen
Heidi driver. Refer to Appendix B: Installing Your Heidi Driver on
page 57. 3D Studio MAX R2 users need not install the Heidi driver
since 3D Studio MAX R2 supports the OpenGL Oxygen driver that
the setup program is currently installing.
13. Once complete, you must restart your computer to activate your
new Oxygen software.
If you have not yet installed your Oxygen card :
•
Select the “No...” radio button (Figure 6);
•
Click “Finish” and shutdown your system.
•
Once you turn your computer’s power off, install your
Oxygen card and reboot your system.