3DLABS Oxygen 402 User Manual
Page 26
20
Dynamic Pictures Oxygen 3D Family
10.
Replace the computer’s cover; plug in your computer and its
peripherals.
11.
Power on your system and log in to Windows NT. You are now
using your Oxygen graphics accelerator card.
12.
Be sure to register your Oxygen card to activate your warranty and
to receive notification of future software updates. It is important
that you include your Oxygen serial number, which is located
either in the upper right corner of the card or on a barcoded
sticker on the card’s reverse.
13.
If you are a user of 3D Studio MAX R1, you will also need to install
the Oxygen Heidi driver, as described in
Appendix B: Installing
Your Heidi Driver on page 57.
NOTE:
The Oxygen 402 card may consume more than the maximum
allowable power for one PCI slot. When installing the Oxygen 402, be
sure that at least one PCI, EISA, or ISA slot in your system is left empty.
This will guarantee that sufficient power will be available for the
Oxygen 402 card. This is not required for users of the Oxygen 102 or
Oxygen 202 cards. Refer to
Appendix E: Mechanical and Electrical
Specifications for power consumption details.