Datalogic Scanning TC1100-1200 - Manual

CODE SELECTION
EAN/UPC disable AA0
EAN 8/EAN 13/UPC A/UPC E enable AA1
AA5
AA8 without ADD ON
with ADD ON
with and without ADD ON
EAN 8/EAN 13 enable AA3
AAK
AAL
AA6 without ADD ON
with ADD ON 2 ONLY
with ADD ON 5 ONLY
with ADD ON 2 AND 5
UPC A/UPC E enable AA4
AAM
AAN
AA7 without ADD ON
with ADD ON 2 ONLY
with ADD ON 5 ONLY
with ADD ON 2 AND 5
EAN 8 enable AAG0
AAG1 check digit transmission disable
check digit transmission enable
EAN 13 enable AAH0
AAH1 check digit transmission disable
check digit transmission enable
UPC A enable AAI0
AAI1 check digit transmission disable
check digit transmission enable
UPC E enable AAJ0
AAJ1 check digit transmission disable
check digit transmission enable
Code 39 disable AB0
Code 39 Standard enable AB11xxyy
AB12xxyy
AB13xxyy no check digit control
check digit control and transmission
check digit control without transmission
Code 39Full ASCII enable AB21xxyy
AB22xxyy no check digit control
check digit control and transmission
Code 2/5 family disable AC0
Interleaved 2/5 enable AC11xxyy
AC12xxyy
AC13xxyy no check digit control
check digit control and transmission
check digit control without transmission
Normal 2/5 5 bars enable AC21xxyy
AC22xxyy
AC23xxyy no check digit control
check digit control and transmission
check digit control without transmission
Industrial 2/5 (IATA) enable AC31xxyy
AC32xxyy
AC33xxyy no check digit control
check digit control and transmission
check digit control without transmission
Matrix 2/5 3 bars enable AC41xxyy
AC42xxyy
AC43xxyy no check digit control
check digit control and transmission
check digit control without transmission
Codabar family disable AD0
Codabar standard enable AD111xxyy
AD112xxyy
AD121xxyy
AD122xxyy
AD212xxyy no start/stop character equality control - nor transmission
no start/stop character equality control but transmission
start/stop character equality control but no transmission
start/stop character equality control and transmission
ABC Codabar no start/stop character equality control but transmission
Code 128 family disable AI0
Code 128 enable AI11 xxyy control without transmission of check digit
EAN 128 enable AI21 xxyy control without transmission of check digit
Code Length AILxxyy
Code 93 family disable AK0
Code 93 enable AK1 xxyy control without transmission of check digit
PDF417 disable AR0
PDF417 enable AR1
Pharmacode disable AQ0
Pharmacode enable AQ1xxyy
AQ2xxyy forward code tx direction
reverse code tx direction
Overflow ratio AQAzz
xxyy = ASCII numbers that define:
xx = min. acceptable code length
yy = max. acceptable code length zz = overflow ratio value
The minimum code length must always be less than or equal to the maximum.
For more detailed information on the TC1100 programmability and complete parameter list, please refer to the
TC1100 Reference Manual.
N2468
821000676 (Rev. H)
TC1100
CCD Scanner
Quick Reference Guide
The TC1100 is a linear CCD Scanner for OEM applications. It is available in two different versions:
Model Description Order Number
TC1100-1100 CCD scanner for linear codes 939501020
TC1100-1200 CCD scanner for linear and PDF417 939501030
Technical Specifications
Power supply 5 Vdc ± 5%
Consumption 1.5 W
Interfaces RS232, WEDGE, PEN Emulation
Max Scans/sec 270
Max resolution 0,076mm (3mils)
Readable codes:
EAN/UPC, Code 39, 2/5 family, Codabar, Code 128, EAN 128, ISBT 128, Code 93,
pharmaceutical codes, Delta IBM, Code 16K, Code 49, (Telepen, MSI/Plessey, Pharmacode
only TC1100-1100), (Codablock-A, Codablock-F Std, Codablock-F EAN, PDF417 only
TC1100-1200)
Default Configuration
Power Save 270 scans/sec, sleep disabled, standby disabled
Reading Parameters On-Line
Code Selection
Enabled codes
(Only TC1100-1200)
• Interleaved 2 of 5: Check Digit transmitted, length: min 4, max 99
• Code EAN8, EAN13, UPCA, UPCB: without ADD ON, Check Digit transmitted, no conversions
• Code 39: length: min 1, max 99
• Code 128: Check Digit not transmitted, length: min 1, max 99
• PDF417
Data Format Code ID disabled, Header = <STX>, Terminator = <CR> <LF>, no Field Adjustment, Code
length TX disabled, character replacement disabled, No Read Character = <CAN>
Decoding Parameters Ink spread enabled, overflow control enabled, interdigit control enabled, Puzzle Solver ™
disabled, decoding safety = 1 read
Enabled interface RS232, 9600, N, 8, 1, no handshaking, ACK/NAK disabled, RX timeout 100 ms, FIFO
enabled, inter-character delay disabled
Reading Diagrams
-160
-140
-120
-100
-80
-60
-40
-20
0
20
40
60
80
100
120
140
160
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320
0.13 mm
(5 mils)
0.30 mm
(12 mils)
0.50 mm
(20 mils)
0.20 mm
(8 mils)
0.20 mm
mm
-90
-80
-70
-60
-50
-40
-30
-20
- 10
0
10
20
30
40
50
60
70
80
90
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180
0.17 mm
(6.6 mils)
0.38 mm
(15 mils)
0.25 mm
(10 mils)
mm
Reading Diagram TC1100-1100 (code 39) Reading Diagram TC1100-1200 (PDF417)