Datalogic Scanning SH2347 - Manual

Special Instructions for
DS1100 SH2347 and DS2200 SH2348
10 - 30 Vdc
Electrical Connections
The scanner cable is equipped with a 25-pin female D-sub connector for
connection with the power supply and input/output signals:
Figure 1 – 25-pin female D-sub connector
25-pin D-sub connector pinout
Pin Name Function
9,13 VS Power supply input voltage +
25 GND Power supply input voltage -
1 * CHASSIS Chassis Ground
2, 21 TXAUX TX RS232 Aux. Interface
3, 20 RXAUX RX RS232 Aux. Interface
4 RTX485 - RTX- RS485 Main Interface
5 RTX485 + RTX+ RS485 Main Interface
7 SGND Signal Ground
8 OUT1 + Output 1 +
11 OUT2 + Output 2 +
18 EXT TRIG + External trigger +
19 EXT TRIG - External trigger -
10, 12, 22 I/O REF Input/Output reference
17 IN1 - Input 1 -
6, 14, 15, 16, 23, 24 N.C. Not Connected
* Pins 1 and 25 are connected together internally.
851000292 (Rev. B)