ADLINK PCM-9112+ - Manual (Page 8)

8
2.7 Daughter Boards and Accessories
The PCM-9112+ DAQ module has several available accessories allowing for easy signal wiring for
measurements and control. Functionality and connections of the available accessories are describe
in the in the following sections.
2.7.1 Connect with ACLD-9137
Equipped with a 37-pin D-sub connector, the ACLD-9137 provides a simple way for connection.
Intuitively layout and reliable screw clamp terminal allows for easy wiring. In conjunction with the
ACL-10337 (two 20-pin headers to DB-37 cable), users can set up the connection immediately.
Figure 6: Connect with ACLD-9137
2.7.2 Connect with DIN-37D
The DIN-37D is a termination board with a DIN socket. When users need to mount the termination
board onto the DIN rail, it provides a convenient interface for installation. To achieve this
connection, use the following cables ACL-10337 and ACL-10137.
Figure 7: Connect with DIN-37D