ADLINK PCM-9112+ - Manual (Page 9)

9
2.7.3 Connect with ACLD-8125
The ACLD-8125 has a 37-pin D-sub connector, which can connect to the PCM-9112+ through a
ACL-10337 and ACL-10137 cable. The most outstanding feature of this daughter board is the CJC
(cold junction compensation) circuit. You can directly connect a thermocouple onto the ACLD-8125
board. The CJC is only suitable for high gain analog input mode.
Figure 8: Connect with ACLD-8125
2.7.4 Connect with DIN-20P
The DIN-20P has a 20-pin ribbon connector with a DIN socket. This board is connected to the
PCM-9112+ via a 20-pin ribbon cable.
Figure 9: Connect with two DIN-20P termination boards