ADLINK ACL-6128A - Manual (Page 11)

Introduction • 3
1.3 Specifications
The ACL-6128A provides the following specifications:
♦ Analog Output (D/A)
• Output Channel: 2 Isolated channels
• Resolution: 12-bit, multiplying D/A converter
• Settling Time: ≤ 30 μs
• Output Range: (Jumper selectable)
• Bipolar Voltage: ±10V, ±5V
• Unipolar Voltage: 0-10V, 0-5V
• Current Loop (sink) : 0-20mA, 4-20mA
• Reference voltages
ƒ Internal: -5V and -10V
ƒ External: DC or AC,
± 10V (max.)
• Output Drive Current: ±5mA
• Current Loop Excitation Voltage: +8V min, 36V max for 0-20mA or 4-
20mA.
• Isolation Voltage: 2500V
RMS
• Accuracy: ±0.012% of FSR
• Linearity: ±1/2 LSB
• Data Transfer: Programmable I/O
• Temperature coefficient 5ppm typical, 15ppm maximum
♦ General Specifications
• Bus Type: PC/AT Bus
• Connector: Two 9-pin D-sub female connector
• Operating Temperature: 0°C - 55°C
• Storage Temperature: -20°C - 70°C
• Humidity: 5 - 95%, non-condensing
• Power Consumption: +5V @ 780mA typical, 1A max
• Dimension: 163 mm (L) x 107 mm (M)