8 termination board supporting, Connect with din-100s, Connect with din-502s – ADLINK PCI-7300A User Manual
Page 28: Termination board supporting, Connect with din-100s connect with din-502s
16
Installation
2.8 Termination Board Supporting
The cPCI/PCI-7300A can be connected with two daughter boards:
DIN-100S or DIN-502S. The functionality and connections are
specified as follows.
Connect with DIN-100S
The DIN-100S is a direct connection for the add-on card that is
equipped with SCSI-100 connector. User can connect this daugh-
ter board by a 100-pin SCSI type cable (ACL-102100) to the cPCI/
PCI-7300A. It is suitable for the applications of 32-bit digital input
or 32-bit digital output.
Connect with DIN-502S
The DIN-502S with the cable ACL-10252 separates the 100-pin
SCSI connector into two 50-pin SCSI connectors. One 50 pin con-
nector is for pin 1 ~ 25 and pin 51~75 of CN1 while the other one
is for pin 26 ~ 50 and pin 76~100 of CN1. That means the DIN-
502S and the ACL-10252 make users easy to connect the 16-bit
digital inputs and 16-bit digital outputs by using two 50-pin daugh-
ter boards respectively. The independent wiring of 16-bit DI and
16-bit DO let users convenient to setup and maintain his systems.