ADLINK cPCI-7434 - Manual (Page 18)

10
•
Getting Started
2.3.2 cPCI-743X PCB Layout
The CN1 is the I/O interface and is a 100-pin SCSI-type connector.
Figure 2: cPCI-743X PCB Layout
2.3.3 cPCI-743XR PCB Layout
CN1 is the I/O interface and is a 100-pin SCSI-type connector. J2 is used for
rear I/O signaling. There are no connectors on the main board.
Figure 3: cPCI-743XR PCB Layout