ADLINK cPCI-7434 - Manual (Page 41)

C/C++ Libraries
•
33
5.7 Interrupt Source Control
@ Description
The 7432 and 7433 both have a dual interrupt system. Two interrupt
sources can be generated and be checked by the software. This
function is used to select and control the 7432/33 interrupt sources by
writing data to the interrupt control register. The interrupt source can be
set as Channel 0 (INT1) and/or channel 1 (INT2) of the digital input
channels.
@ Syntax
PCI-7432 / cPCI-7432 /cPCI-7432R
C/C++ (DOS)
void _7432_Set_INT_Control (U16 cardNo, U16 int1Flag,
U16 int2Flag)
C/C++ (Windows 95)
void W_7432_Set_INT_Control (U16 cardNo, U16 int1Flag,
U16 int2Flag)
Visual Basic (Windows 95)
W_7432_Set_INT_Control (ByVal cardNo As Integer, ByVal
int1Flag As Integer, ByVal int2Flag As Integer)
PCI-7433 / cPCI-7433 / cPCI-7433R
C/C++ (DOS)
void _7433_Set_INT_Control (U16 cardNo, U16 int1Flag,
U16 int2Flag)
C/C++ (Windows 95)
void W_7433_Set_INT_Control (U16 cardNo, U16 int1Flag, U16
int2Flag)
Visual Basic (Windows 95)
W_7433_Set_INT_Control (ByVal cardNo As Integer, ByVal
int1Flag As Integer, ByVal int2Flag As Integer)
@ Argument
cardNo: card number of selected board
int1Flag: INT1 setting; 0: disable, 1: enable
int2Flag: INT2 setting; 0: disable, 1: enable