ADLINK C485 - Manual (Page 36)

30
• Installation
2.5.2 Windows 95/98 Installation
Once Windows 95/98 system has been started, the plug & play function in
95/98 system will find the new serial communication card. If this is the first
time to install serial communication card in your Windows 95/98 system,
you will be informed to install the driver. Please follow the steps to install the
driver.
1. Click the Next button in the Update Device Driver Wizard window,
Win95 will start to search floppy drive A for the Serial
Communication card driver information, After fail to find the
information in drive A, it will display the message “Windows was
unable to locate a driver for this device.”
2. Insert ADLINK’s All-in-one CD-ROM drive.
3. Click the “Other Location…” button in the Update Device Driver
Wizard Window, then the Select Other Location windows will
appear.
4. Click Browse button to invoke the Browser for Folder window, then
select the location
X:\NuCOM\C584588 (X indicates the CD-ROM drive).
Because the resource will be assigned by PCI BIOS, it is not easy to check
which card is first or second from resource. So the jumper JP1 will play the
role for system to fix the COM port number for each card.
After you had installed the driver, you might be informed to have new
hardware found. You do not have to install the driver again, Windows 95/98
will add the COM port automatically.
1. You can install up to two C584/C588 cards in one 95/98 system.
2. When you need to install two same type cards in one 95/98 system,
you must confirm to let one card’s jumper is ON, and the other
card’s jumper is OFF.
3. The card with jumper ON will have COM port number assigned for
first card. The card with jumper OFF will have COM port number
assigned for second card.