5 software installation – ADLINK cPCI-3544 User Manual
Page 29
Installation
• 23
2.5 Software Installation
2.5.1 Windows
NT
Installation
Once Windows NT system has been started, login using an account with
administrative right.
1.
Start the [Control Panel] applet by double clicking the icon in the
[Program Managers] main group.
2.
In the [Control Panel] applet, double click [Network] icon to bring up
the Network Control Panel Applet (NCPA).
3.
Within the NCPA, select the [Add Adaptor] button, a list of possible
adaptors should be displayed. Go to the end of this list and select
<Other> requires disk from manufacturer.
4.
When prompted for the path, specify the drive and directory where
the NCPA can find the new driver for the card installed.
For cPCI-3534, specify as follows:
X:\NuCOM\CPCI3534\NT4
For cPCI-3544, specify as follows:
X:\NuCOM\CPCI3544\NT4
For cPCI-3538, specify as follows:
X:\NuCOM\CPCI3538\NT4
(Where X indicates CD-ROM drive)
1.
Follow the configuration dialog boxes to install the driver.
2.
In the default condition, the TTY port is given name from “COM3”.
User can specify the start “COM” port number in installation
procedure.
3.
We can install up to two same type serial communication cards in
one NT system.