ADLINK cPCI-3544 - Manual (Page 32)

26
• Installation
IRQ left for P&P function. If there are no IRQs left to be assigned to
the serial communication card, there may be errors in the operation.
2.5.3 Windows 2000/XP Installation
Once the Windows 2000/XP system has been started, the Plug and Play
function in 2000/XP system will find the new cPCI-3534/3538/3544 card. If
this is the first time installing drivers on your 2000/XP system, a dialogue
box will instruct the user to install the driver. Follow the instructions below
to specify the driver location.
For cPCI-3534/3538
X:\SerialComm\cPCI-353X\Win2000-XP; X is the CD-ROM
For cPCI-3544
X: \SerialComm\cPCI-3544W2000; X is the CD-ROM
As the resource will be assigned by PCI BIOS, it is relatively difficult to
check which card is first card or second card from resource. For this
reason, ADLINK has placed a jumper in each cPCI-3534/3538 card to set
the first card or second card for this these comport cards. (cPCI-3544 does
not include this function). The COM port number can now be fixed for each
card. This is very important for cPCI-3534/3538 card.
2.5.4 LINUX Driver Installation
Installation for cPCI-3534/3538 Linux Driver
1. Copy the "alnxsrc.Z" file onto theLinux system. (alnxsrc.Z is
located in “X:\SerialComm \cPCI-353X \Linux” directory; X is the
CD-ROM.)
2. Uncompress the file to retrieve the original diskette image file
"alnxsrc".
uncompress alnxsrc
3. Use the "dd" command to duplicate the diskette.
dd if=alnxsrc of=/dev/fd0
4. Please "tar" this diskette in root directory.
cd /
tar xvf /dev/fd0
5. Please install driver in /etc/rayon directory.
cd /etc/rayon
./Install
6. Select the target card type to install driver.
The kernel source file is vital, and can be found in the
/usr/src/linux directory. Some Linux distribution systems may