7 chipset setup, Hda controller, Onboard lan bios init – ADLINK cPCI-3615 User Manual
Page 104: Onboard lan1/2 and vga output select, Initial graphics adapter, Clkgen spread spectrum, Chipset setup
90
BIOS Setup
8.7
Chipset Setup
Select the Chipset tab from the setup screen to enter the Chipset
BIOS Setup screen. You can select any of the items in the left
frame of the screen to go to the sub menu for that item. The
Chipset BIOS Setup screen is shown below.
HDA Controller
Set this value to Enable/Disable the HD Audio Controller.
Onboard LAN BIOS Init
Set this value to enable/disable the invoking of onboard LAN’s
PXE ROM. Disabling can shorten the POST time by not initializing
LAN PXE ROM. Enable it if boot from LAN is needed.
Onboard LAN1/2 and VGA Output Select
Set the Onboard LAN1/2 and VGA output to Front or Rear.
Initial Graphics Adapter
Select which graphics controller to use as the primary boot device.
ClkGen Spread Spectrum
Set this value to Enable/Disable the ClkGen spread spectrum
function.