ADLINK cPCI-3615 - Manual (Page 19)

Introduction 5
cPCI-3615
1.5 Package Contents
The cPCI-3615 is packaged with the following components. If any
of the items on the contents list are missing or damaged, retain the
shipping carton and packing material and contact the dealer for
inspection. Please obtain authorization before returning any prod-
uct to ADLINK. The packing contents of the cPCI-3615 Series are
non-standard configurations and may vary depending on customer
requests.
Processor Blade
X The cPCI-3615 Series Processor Blade
Z CPU, RAM specifications will differ depending on
options selected
Z Thermal module is assembled on the board
X Y-cable for PS/2 combo port (8HP/12HP version only)
X 2.5” HDD accessory pack (8HP/12HP version only)
X ADLINK All-in-One CD
X User’s manual
Rear Transition Module
X cPCI-R3610: 8HP width, 50mm depth Rear Transition Mod-
ule with 2x COM, USB, 2x GbE, 2x SATA, VGA
X cPCI-R3610T: 8HP width, 80mm depth Rear Transition
Module with 2x COM, USB, 2x GbE, 2x SATA, VGA
NOTE: NOTE:
The contents of non-standard cPCI-3615 configurations may
vary depending on the customer’s requirements.
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.