Lan control switches (sw3, sw4), Table 3-5, Lan control switch settings – ADLINK cPCI-R6700 Series User Manual
Page 33
Advertising
![background image](/manuals/733557/33/background.png)
Board Interfaces
21
cPCI-R6700
LAN Control Switches (SW3, SW4)
The cPCI-R6700 can route LAN signals from the CPU blade to
either the PICMG 2.16 backplane or to GbE a/b on the face-
plate I/O (but not both simultaneously). Switches SW3 and
SW4 can be used to route the LAN signals (set to faceplate
RJ-45 connectors by default).
Table 3-5: LAN Control Switch Settings
LAN signals routed to
SW3
SW4
PICMG 2.16 Backplane
All OFF
All OFF
Faceplate RJ-45 connectors
(default)
All ON
All ON
ON
1
2
3
4
5
6 7
8
ON
1
2
3
4
5 6
7
8
SW3 SW4
Advertising