4 getting started, 1 installing a 2.5" sata drive, Chapter 4, getting started: describes the – ADLINK cPCI-R6700 Series User Manual
Page 35: Installing a 2.5" sata drive, 4getting started
Advertising
Getting Started
23
cPCI-R6700
4
Getting Started
4.1
Installing a 2.5" SATA Drive
The cPCI-R6700D has space onboard to mount a 2.5" storage
device using the bracket kit provided. The kit includes 4x M3 4mm
screws and 4x M3 6mm screws. Follow the steps below to install a
SATA drive on the RTM.
1. Prepare a 2.5" SATA drive and locate the bracket kit in
the package.
2. Align the bracket with SATA power/signal connectors as
shown and mount the drive onto the bracket. Fasten the
bracket to the drive with two of the M3 4mm screws.
Advertising