3 jumper settings, 3 jumper, Settings – ADLINK nanoX-BASE User Manual
Page 13
Advertising
2.3 Jumper Settings
JP1: Backlight Voltage
Jumper
Configuration
1 - 2
+12V
3 – 4
Reserved
5 – 6
+5V*
JP2: Panel Voltage
Jumper
Configuration
1 - 2
+12V
3 – 4
Reserved
5 – 6
+5V
7 - 8
Reserved
9 - 10
+3.3V*
JP4: LVDS/TTL Mode
Jumper
Configuration
1 - 2
TTL Output Active
3 - 4
Reserved
5 - 6
LVDS Output Active*
JP5: Backlight Control Mode
Jumper
Configuration
1 - 2
BLCTRL_PWM *
2 - 3
BLCTRL_VTL
Note: * indicates default setting
FPTB User's Manual
13
Advertising
This manual is related to the following products: