2 lvds input to fptb, 2 lvds, Input to fptb – ADLINK nanoX-BASE User Manual
Page 15
Advertising
3.2 LVDS Input to FPTB
Use the LVDS-to-LVDS cable that came with the FPTB to connect the LVDS output
connector on the ADLINK carrier board (CN6 on nanoX-BASE) to the LVDS input connector
on the FPTB (CN4).
Plug the LVDS-to-LVDS cable into nanoX-BASE CN6
Plug the LVDS-to-LVDS cable connector into FPTB CN4
LVDS-to-LVDS cable
FPTB User's Manual
15
Advertising
This manual is related to the following products: