ADLINK nanoX-BASE - Manual (Page 8)

• Customer carrier (with LVDS output) → Customer’s cable to FPTB → FPTB →
Customer’s cable to TTL panel: This configuration provides LVDS-to-TTL conversion
and backlight control when using a customer carrier board with a TTL display. User must
provide the cable connections from the customer carrier board LVDS output to the
FPTB's LVDS input connector and from the FPTB's TTL output and backlight control
connectors to the TTL panel inputs.
TTL Display
Customer
Carrier Board
LVDS output
FPTB
TTL
Signal
5V and
12V Input
Backlight
control
• Customer carrier (with LVDS output) → Customer’s cable to FPTB → FPTB →
Customer’s cable to other LVDS panel: This configuration provides backlight control
when using a customer carrier board with a customer LVDS flat panel display. User must
provide the cable connection from the customer carrier board LVDS output to the FPTB's
LVDS input connector and from the FPTB's LVDS output and backlight control
connectors to the LVDS panel inputs.
LVDS Display
Customer
Carrier Board
LVDS output
FPTB
LVDS
Signal
5V and
12V Input
Backlight
control
8 FPTB User's Manual