ADLINK ETX-CV - Manual (Page 54)

ETX-CV User’s Manual Page 54
8.3.8 W83627DHG Super IO Configuration
You can use this screen to select options for the Super IO settings. Use the up and down < Arrow
> keys to select an item. Use the < + > and < - > keys to change the value of the selected option.
The settings are described on the following pages. The screen is shown below.
Serial Port 0,1 Configuration
Set Parameters of Serial Port 0, 1 (COM 1/2). Set this value to Enabled/Disabled.
Change Settings
This option specifies the base I/O port address and interrupt request address of Serial Port 0, 1
(COM 1/2). Options shown below.