A.4 standoff types - carrier board, Standoff types - carrier board – ADLINK ETX-CV User Manual
Page 81
ETX-CV User’s Manual
Page 81
ETX-CV User’s Manual
Page 81
33-72000-0030
33-72011-0030
33-72007-9P50
33-72011-9P50
C0.2
C0.3
C0.5
C0.2
C0.2
C0.3
C0.5
A.4 Standoff Types - Carrier Board
For different mounting procedures there are different standoffs available for the carrier board.
Note that threaded standoffs are both DIP and SMT type and the through-hole types are all SMT
type. Other types not listed can be made available upon request.
3 mm through-hole standoff (SMT type)
for HTS-EAT-B with 3 mm Hirose carrier
board connectors
3 mm threaded standoff (DIP type)
for HTS-EAT-BT with 3 mm Hirose carrier
board connectors
9.5 mm through-hole standoff (SMT type)
for HTS-EAT-B with 9.5 mm Hirose
carrier board connectors
9.5 mm threaded standoff (DIP type)
for HTS-EAT-BT with 9.5 mm Hirose
carrier board connectors