ADLINK ETX-CV - Manual (Page 65)

ETX-CV User’s Manual Page 65 ETX-CV User’s Manual Page 65
8.5 Boot Setup
Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen. You can select
any of the items in the left frame of the screen, such as Boot Device Priority, to go to the sub
menu for that item. You can display an Boot BIOS Setup option by highlighting it using the <
Arrow > keys. The Boot Settings screen is shown below:
Bootup Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up.
Off - This option does not enable the keyboard Number Lock automatically. To use the 10-keys
on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key
pad. The Number Lock LED on the keyboard will light up when the Number Lock is engaged.
On - Set this value to allow the Number Lock on the keyboard to be enabled automatically when the
computer system is boot up. This allows the immediate use of 10-keys numeric keypad located on
the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard will be lit.
Quiet Boot
Disabled - Set this value to allow the computer system to display the POST messages.
Enabled - Set this value to allow the computer system to display the OEM logo.
Fast Boot
Disabled - Set this value to allow the BIOS to perform all POST tests.
Enabled - Set this value to allow the BIOS to skip certain POST tests to boot faster.