4 controller area network (can) port, Controller area network (can) port, Table 1-5 – ADLINK MXC-2300 User Manual
Page 32: Can port pin assignments, Figure 1-13, Can port, Preliminary
PRELIMINARY
20
Introduction
1.6.4
Controller Area Network (CAN) Port
Figure 1-13: CAN Port
Table 1-5: CAN Port Pin Assignments
The Controller Area Network (CAN) interface supports dual-port
isolated CAN connection that can run independently or bridged at
the same time. The built-in CAN controller is a Phillips SJA1000,
providing bus arbitration and error detection with auto correction
and re-transmission capability, and features:
X
Dual independent CAN network operation
X
Bridge function support
X
Compatibility with CAN specification 2.0 parts A and B
X
Optically isolated CAN interface with up to 1000 Vrms isola-
tion protection
X
Direct memory mapping to CAN controllers
X
Powerful master interface for CANopen, DeviceNet and
SDS application layer protocol
Pin
Signal
Pin
Signal
1
N/A
6
N/A
2
CAN_L
7
CAN_H
3
GND
8
N/A
4
N/A
9
N/A
5
N/A
1
5
6
9